996, KIT 996, motore 996

Supercharger kit 996 Carrera +125Hp +100Nm

  • codice prodotto: VF997136SI
  • prezzo: on request
  • descrizione:

  • Porsche 996 3.4 / 996 S 3.6 Supercharger

    • The offer comprehends the full supercharger kit, the installation of the parts, the ECU map and the final settings of the vehicle.
    • Thanks to our partnership with the famous superchargers brand Vf-Engineering, based in USA, we are able to propose a Vortech supercharger and all that it’s needed to make it work on naturally aspirated Carrera engines, from the 3,4L 996 to the 3,8L 997.
    • With just 0,3/0,4 bar of pressure from the supercharger, a huge amount of torque and horsepower is obtained.
    • The volumetric compressor allows the naturally aspirated engine to behave as originally, giving a an amount of additional power that, proportionally to the revolutions of the engine, keeps growing.
    • While a turbo engine has a slow throttle response and the thrust of its turbos comes and goes, the supercharger gives the sensation of having a bigger naturally aspirated engine.
    • It revolutionizes the Porsche, while maintaining the original features.
    • The chart in the image shows a Carrera 3,6 997 original and supercharged output.
    • The final horsepower (420Hp) is the minimum obtainable. With a stronger ECU map at high revs and a slight increase (0,1 bar) of pressure from the supercharger, 450 Hp are easy to reach.
    • The enormous amount of torque and the thrust felt as soon as you touch the gas pedal is incomparable to the original engine, the torque keeps going until high rpms and the car keeps pushing forward.
    • The kit is ready for every 996 and 997 model and the installation can be done when we are sure that the engine is safe and works properly, with every check and oil change made during the previous years, in order to avoid any damages on used components that should have been changed or reinforced previously.

    The kit consists of:

    • Vortech V3 Si-Trim supercharger
    • Air water charge cooler system
    • Polypropylene water reservoir
    • OEM high density water radiator
    • Bosch water pump
    • Bosch EV14 fuel injectors
    • Bosch bypass valve
    • Hard anodized 6061-T6 aluminum bracket
    • OEM serpentine belt
    • K&N induction filter with air box
    • ECU tuning
  • modelli: 996 Carrera 3,4 / 996 Carrera S 36

996, 997, motore 996, motore 997

Lightweight flywheel (5,9 Kg) Carrera 3,4L/3,6L

  • codice prodotto: FVD11401203
  • prezzo: 998 €  – without VAT
  • descrizione:
  • – Super Lightweight (13lbs.) 5.9kg
    – Quicker Acceleration
    – Constructed from aircraft-quality 6061-T6 grade aluminum
    – Replaceable treated-steel heat soak friction surface.
  • modelli: 996 Carrera all models/ 997 3,6L ’05-’08 239 Kw

986 / 987, 996, 997, motore 986 / 987, motore 996, motore 997

Intermediate Shaft (IMS) Repair Kit

  • codice prodotto: FVD10590104 / FVD10590103
  • prezzo: 399 € – without VAT
  • descrizione:   Intermediate shaft IMS bearing repair kit, consisting of a double row of bearings for the early 996 models or a single row in the later models, more durable than the original.
    It solves the problem of extreme stress on the bearing in Carrera engines, which causes it to break, with disastrous consequences for the engine.
  • We recommend this bearing as a replacement if the car is to remain original, however we have created a special kit with a direct oil lubrication modification on the bearing, with oversized flange and pin, specifically designed to avoid wear of the internal balls thanks to a direct flow of internal oil.
  • modelli: 996 Carrera / 997 Carrera / 986 / 987

996, 997, motore 996, motore 997

996 Turbo Reinforced Intercooler Hose Kit

  • codice prodotto: FVD12399600
  • prezzo: 396 € – without VAT
  • descrizione:
  • FVD’s direct replacement boost hose kit eliminates common boost hose “blow outs” on modified Turbo’s.
  • Tested to withstand over 75 psi (5 bar) boost pressure.
  • Fuel and oil resistant
  • Temperature range between – 50 to + 180 degrees
  • Bolt on kit
  • modelli: 996 Turbo, GT2

996, 997, modern racing, motore 996, motore 997, motore modern racing

Carrillo connecting Rods Set -Turbo/GT2

  • codice prodotto: FVD10397501
  • prezzo: 2291 € – without VAT
  • descrizione:
  • When used in 997.1 Turbo, Connecting rod bearing ((993103147 15STAM)) must be used (tongue / nose opposite).
    Carrillo is one of the most respected connecting rod manufacturers in competitive motor sports.
  • Carrillo rods are constructed from their propriety alloy and forged to their custom specifications.
  • The rods are then fully machined to guarantee the removal of all surface imperfections.
  • After heat treatment, each connecting rod is magnaflux inspected and hardness checked, then machined to final size.
  • Each set is balanced and then shot-peened to achieve the ultimate in strength and fatigue properties.
  • modelli: 996 GT2 and Turbo / 997 GT2 and Turbo

996, 997, motore 996, motore 997

996/997 Carrera engines overhauling

  • codice prodotto: 96Si003EX
  • prezzo: on request
  • descrizione: 996 and 997 aspirated engines have completely different engine sectors, compared to the basic 911 engine structure that we got to know before.
  • This historical modification brought several problems along, such as poor oil lubrication of major components (IMS shaft bearing, Crankshaft etc), worse material overall, heads water leaking and so on.
  • We’ve been overhauling these engines for almost 10 years now and we basically know every engine failure that could happen and how to prevent it.
  • Let us know what your engine issue is and we probably can tell you if the problem is big or small.
  • modelli: 996 Carrera / 997 Carrera

986 / 987, 996, 997, motore 986 / 987, motore 996, motore 997

Oil pan, FVD Motorsport

  • codice prodotto: FVD 207 988 01
  • prezzo: 395 € – without VAT
  • descrizione: Scavenging and aeration in the oil pan have been identified as a problem in the 996, 997 and Boxster models that experience high G-forces on the racetrack.
    FVD has the solution:
    The ”FVD Motorsport” oil pan has the baffling concept of the X51 oil pan. It also increases the oil capacity because the pan is deeper. This pan adds close to 3/4 of quart (0.6 Liters) of oil over the original X51 pan. This allows for increased oil cooling and engine performance by preventing oil starvation and oil foaming.
    The ”FVD Motorsport” oil pan is also designed with external cooling fins
    which helps to lower the oil temperature.
  • modelli: 996 Carrera / 997 Carrera / 986 / 987

993, 996, 997, modern racing, motore 993, motore 996, motore 997, motore modern racing, motore Youngtimer racing, Youngtimer racing

FVD Billet Diverter Valve - Reinforced

  • codice prodotto: FVD123212
  • prezzo: 149 € each.  – without VAT
  • descrizione: FVD Diverter valve is a direct replacement for the OEM valve.
    Prevents boost leaks and “recovers” quicker for better boost and throttle response.
    Why replace the OEM Diverter valve with an “FVD Diverter Valve”
    Under higher boost pressures the BOSCH valve can start to leak (Plastic housing).
  • The plastic cover begins to lift off the sealing face as the internal spring’s resistance is exceeded. Our diverter valve is made out of aluminum.
    Between shifts or sudden throttle lift-off the compressor wheel is still spinning very fast and pumping air at the closed throttle plate, as well as placing strain on the intercooler, hoses and fittings. The diverter valve keeps air from flowing backwards over the compressor wheel allowing the turbocharger to continue spinning freely.
    When back on the throttle, boost pressure rises much quicker with an FVD diverter valve.
    NOTE: SOLD INDIVIDUALLY.
    Also Includes hardware pack (clamps, adapter, strip)
  • modelli: Turbo and GT2 993 / 996 / 997