- codice prodotto: R4UCA368P
- prezzo: 3/6 pin 600 € – without VAT
- 8 pin 750 € – without VAT
- descrizione: completely new ignition control unit.
- Rebuilt according to the standards of the time using the same internal circuits.
- modelli: 911 ’69 – ’83
Raven headlights
- codice prodotto: NE911BLRA
- prezzo: 2395 € – without VAT
- descrizione: The base model RAVEN is a sleek, elegant yet simple design that pairs well with most paint colors.
- Each fixture features the latest in high output DOT/ECE approved Bi LED optics resulting in a sharp, bright and defined beam pattern.
- All fixtures are pre-leveled for your convenience and Installation takes 15 mins to complete.
- The RAVEN is handcrafted in 9eleven signature quilted aluminum and parts are professionally coated in the same finishes / colors as Fifteen52’s Outlaw series wheels.
- H4 styled lenses are double coated with a specially designed epoxy process known as “Hard Coating”. Commonly used in the Aerospace industry, this special coating is very durable, will withstand numerous road conditions, will not scratch easy and most of all, maximizes clarity. Better than glass, Its use makes each lens virtually unbreakable and clean even when the vehicle itself is dirty thanks to its antistatic properties.
- Unlike standard plastic type lenses where constant polishing is required, this coating is safe to clean with any standard non-abrasive cleaning solutions such as Windex and will last for many years to come.
- All RAVEN series fixtures are a direct plug and play, meaning there are no wires to run, components to mount, or holes to drill.
- Your set also includes a specially designed storage pouch that safely holds your original OEM fixtures or your new ones, should you decide to switch them out.
- colore: black, gold, silver, chrome, gunmetal | clear or fluted lens.
- modelli: 911 dal ’65 al ’94
Raven S headlights
- codice prodotto: NE911BLRS
- prezzo: 2880 € – without VAT
- descrizione: The RAVEN S is not only sleek, but intelligent as well.
- The RAVEN S is the only fixture available specifically designed for older 911 models that houses all the electronics and components necessary to automatically switch from daytime driving to night at the pull of a switch.
- In addition to the active DRL features, the fixture also houses a very discrete yet powerful turn signal.
- With no need to modify anything, installation takes 15 mins to complete and all fixtures are pre-leveled for your convenience.
- Each fixture comes with the latest in high output DOT/ECE approved Bi LED optics resulting in a sharp, bright and defined beam pattern.
- The RAVEN S is handcrafted in 9eleven signature quilted aluminum and parts are professionally coated in the same finishes / colors as Fifteen52’s Outlaw series wheels.
- H4 styled lenses are double coated with a specially designed epoxy process known as “Hard Coating”. Commonly used in the Aerospace industry, this special coating is very durable, will withstand numerous road conditions, will not scratch easy and most of all, maximizes clarity.
- Better than glass, its use makes each lens virtually unbreakable and clean even when the vehicle itself is dirty thanks to its antistatic properties.
- Unlike standard plastic type lenses where constant polishing is required, this coating is safe to clean with any standard non-abrasive cleaning solutions such as Windex and will last for many years to come.
- All RAVEN S series are a direct plug and play, meaning there are no wires to run, components to mount, or holes to drill.
- A specially designed harness comes with each set that is a direct plug and play with two “self tapping” additional wires to activate the DRL and turn signal features.
- Your set also comes with their own storage pouch that safely holds your original OEM fixtures or your new ones, should you decide to switch them out.
- colore: black, gold, silver, chrome, gunmetal, silver satin
- modelli: 911 dal ’65 al ’94
Rev limiter
- codice prodotto: RO7083
- prezzo: 300 € – without VAT
- descrizione: Rev limiter for both coil ignition and Hall/ PK sensoror
Compatible with all models with 3/6/8 poles Bosch ECUs. - It cuts ignition in a soft way.
- modelli: 911 from ’70 to ’89
Racing bushing set for shift rod coupling
- codice prodotto: 150PB00741
- prezzo: 56 € – without VAT
- descrizione:
- Installed on the joint in the central tunnel, towards the gearbox, this set of 2 racing bushes, much harder and more precise than the original ones, reduces the forward and backward movement of the gear lever.
- A faster and more precise engagement is obtained.
If necessary, by withdrawing your used complete joint we can supply you directly the new joint with the bushes already installed, for a cost of € 80 + VAT. - modelli: 911 all -’86
Spoiler 930 Turbo
- codice prodotto: dp930821
- prezzo: 1110 € – without VAT
- descrizione:
- Light, fiberglass spoiler with compact and resistant structure, made in vacuum.
- You can also purchase it in carbon and Kevlar.
- Suitable for custom road models or high level racing preparations.
- Higher internal space, suitable for upgraded Intercoolers.
- modelli: 911 -’89
Carbon protective plate 911 G-model
- codice prodotto: DPPB911G
- prezzo: 156 € – without VAT
- descrizione:
-
Very light protective plate with resistant carbon frame.
-
The original plate is made of 2mm steel and is very heavy.
-
This is a quick and cheap solution to get rid of some weight.
- It’s installed on the lower center part of the front axle and is tightened together with the sway-bar supports on the chassis.
- modelli: 911 ’74-’89
Spoiler RSR 3,0
- codice prodotto: dpK821XX
- prezzo: 1050 € – without VAT
- descrizione:
- Light, fiberglass spoiler with compact and resistant structure, made in vacuum.
- You can also purchase it in carbon and Kevlar.
- Suitable for custom road models or high level racing preparations.
- modelli: 911 -’89
Spoiler SC RS
- codice prodotto: dpK841XX
- prezzo: 1120 € – without VAT
- descrizione:
- Light, fiberglass spoiler with compact and resistant structure, made in vacuum.
- You can also purchase it in carbon and Kevlar.
- Suitable for custom road models or high level racing preparations.
- Bonnet lifter and wing closing supports threads like the originals.
- modelli: 911 -’89 all, on request for 964
Set front&rear wide RSR 3,0 bumpers
- codice prodotto: DPRSR30FRB
- prezzo: 1240 euro – without VAT
- descrizione:
- set of 3,0 RSR wide bumpers for RSR fenders, front and rear, with front Oilcooler and brakes cooling openings.
- Created with fiberglass in vacuum, light, resistant, reinforced in the middle.
- Great quality, made in Germany, the shape is precise and its borders are well made.
- Great for racing preparations, for tuning 911 street cars or customizing 964 models.
- There’s also a version in Carbon/Kevlar, even lighter, on request.
- modelli: 911 / 964